513 Resetting to factory settings
Note
• If the LM-CIRIA control unit is reset to its factory settings, all parameter values configured by the
user except the language setting will be lost.
Path: SERVICE MENU / INTERNAL / CONFIGURATION / FACTORY RESET
Figure 142: FACTORY RESET settings level
– Start point: FACTORY RESET settings level
1.
Select YES to reset the LM-CIRIA control unit to its factory settings.
= The LM-CIRIA control unit is reset to its factory settings.
= The previous selection level appears.
1.
Select NO if you do not wish to reset the LM-CIRIA control unit to its factory settings.
= The previous selection level appears.
= The LM-CIRIA control unit retains the parameter values configured by the user.
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Configuring the LM-CIRIA control unit
83