Operation; Recalling A Scene - Zumtobel LUXMATE CIRIA Instructions For Start-Up And Use

4 Operation

In this section, the operating options available to a user of the LM-CIRIA control unit are described.
These operating options depend on the room's technical equipment.
Note
•
The LM-CIRIA control unit is optimally configured for the room's use when the system is commissioned. This
configuration should only be changed by service personnel authorised by Zumtobel.

41 Recalling a scene

– Start point: entry level
1. Select the desired scene icon.
= The scene icon illuminates.
= The scene is recalled.
Figure 18: Recalling DESK scene
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Operation
18