510 Configuring the touchscreen
The behaviour of the touchscreen can be adapted to suit individual requirements. You can configure
how the touchscreen reacts when it is touched. The display can also be configured so that it can be
easily read and is protected during longer periods of disuse.
5101 Brightness
Path: SERVICE MENU / INTERNAL / CONFIGURATION / DISPLAY / BRIGHTNESS
Figure 136: BRIGHTNESS settings level
– Start point: BRIGHTNESS settings level
= Option is illuminated.
1.
Run your finger along the touchring until the desired setting appears.
2.
Select SAVE to save the setting.
= Touchscreen brightness is saved.
= The previous selection level appears.
Notes
• Settings are only saved if SAVE is selected.
• The setting takes effect immediately.
Parameter
BRIGHTNESS
Table 31: BRIGHTNESS setting options
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Configuring the LM-CIRIA control unit
Value range
1, 2, 3, 4
(1 = very dark,
4 = very bright)
Factory setting
3
77