Table of Contents
Advertisement
Deleting group addresses within a room
Note
• This process deletes all addresses within a group and the group address itself, i.e. the addresses of
both the inputs and the outputs.
– Start point: DELETE ADDRESS selection level
1.
Select GROUP.
= GROUP settings level appears.
= The room address of the LM-CIRIA control unit is displayed.
= GROUP illuminates.
2.
Run your finger along the touchring until the desired group address appears.
3.
Select DEL.
= Selection confirmation appears.
4.
Select YES.
= All addresses within the group and the group address itself are deleted.
= The previous selection level appears.
Deleting bus addresses within a room
– Start point: DELETE ADDRESS selection level
1.
Select BUS ADDR.
= BUS ADDRESS settings level appears.
= The room address of the LM-CIRIA control unit is displayed.
= BUS ADDR. illuminates.
2.
Run your finger along the touchring until the desired bus address appears.
3.
Select DEL.
= Selection confirmation appears.
4.
Select YES.
= Bus address is deleted.
= The previous selection level appears.
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Commissioning the field level
92
Advertisement
Chapters
Table of Contents
