Touchring Dir Settings Level; Type Settings Level - Zumtobel LUXMATE CIRIA Instructions For Start-Up And Use

8. Select NEXT.
= TYPE settings level appears.
= Option is illuminated.
Figure 96: TYPE settings level
9. Run your finger along the touchring until the desired building service type appears.
10. Select NEXT.
= TOUCHRING DIR settings level appears.
= Option is illuminated.
Figure 97: TOUCHRING DIR settings level
11. Run your finger along the touchring until the desired setting appears.
12. Select SAVE to save the settings.
= The message SAVED briefly appears.
= Settings are saved.
= The new building service icon can be accessed in the entry level.
= The previous selection level appears.
Note
• Settings are only saved if SAVE is selected.
Building service type
COMMON (all building services)
Brightness
Blind position
Slat angle
Screen
Colour temperature
Window
Curtain
Temperature
Air exchange
Table 18: Selection of TYPE setting options
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Configuring the LM-CIRIA control unit
Building service type number
1
2
3
4
10
13
65
64
11
39
57