Table of Contents
Advertisement
Parameter
HOUR
MINUTE
Table 51: START TIME setting options
Defining the condition
Figure 154: SCENE CALL settings level
Note
• The condition under which a specified scene is to be recalled is defined here. The scene is only re-
called if the condition is met at the set start time.
– Start point: SCENE CALL settings level
1.
Select CONDITION.
= CONDITION illuminates.
2.
Run your finger along the touchring until the desired setting appears.
3.
Select SCENE.
= SCENE illuminates.
4.
Run your finger along the touchring until the desired number appears.
5.
Select SAVE to save the settings.
= The message SAVED briefly appears.
= The condition and scene to be recalled are saved.
= SWITCH TIME - FADE settings level appears.
Notes
• Settings are only saved if SAVE is selected.
• Selecting SAVE automatically saves all values displayed on the touchscreen.
CONDITION parameter
ALL
PRESENCE
ABSENCE
1 – 20
Table 52: CONDITION setting options
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Value range
0 – 23
0 – 59
The set scene is recalled regardless of which scene is enabled
at the start time.
The set scene is only recalled if the presence scene is enabled
at the start time.
The set scene is only recalled if the absence scene is enabled
at the start time.
The set scene is only recalled if the scene with the selected
number is enabled at the start time.
Commissioning the field level
Description
98
Advertisement
Chapters
Table of Contents
