Commissioning The Field Level - Zumtobel LUXMATE CIRIA Instructions For Start-Up And Use

6 Commissioning the field level

The field level may only be commissioned by service personnel authorised by Zumtobel.
The field level is commissioned via the service menu. You must log in to the LM-CIRIA control unit to
access this menu. Once you have logged in, the selection and settings levels can be accessed via the
buttons. In this manual, service menu settings level locations are given in the form of a path. For easy
orientation, the most important part of the path is displayed in the touchscreen header.
Example:
Path: SERVICE MENU / EXTERNAL / ASSIGN ADDRESS / OUTPUTS
Description:
1. Log in.
2. Select EXTERNAL.
3. Select ASSIGN ADDRESS.
4. Select OUTPUTS.
Different parameter values are often available for commissioning the field level. These parameter values
are listed for the associated parameter. Parameter values in grey are the factory settings for the control
unit.
Example:
Building service type
COMMON (all building serv-
ices)
Brightness
Blind position
...
Table 39: TYPE setting options
The BRIGHTNESS parameter value is the factory setting in this example.
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Building service type number
1
2
3
...
Commissioning the field level
84