Action Click - Zumtobel LUXMATE CIRIA Instructions For Start-Up And Use

5103 Action click

Path: SERVICE MENU / INTERNAL / CONFIGURATION / ACTION CLICK
Figure 138: ACTION CLICK settings level
– Start point: ACTION CLICK settings level
= LEVEL is illuminated.
1. Run your finger along the touchring until the desired setting appears.
2. Select TEST to check the action click volume level.
= An action click is heard at its set level.
3. Select SAVE to save the setting.
= Action click setting is saved.
= The previous selection level appears.
Notes
• Settings are only saved if SAVE is selected.
• The action click setting applies to both the touchring and the touchscreen buttons.
Parameter
LEVEL
Table 34: LEVEL setting options
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Configuring the LM-CIRIA control unit
Value range
0, 1, 2, 3, 4
(0 = no action click,
4 = loud action click)
Factory setting
0
79