Manual Orientation - Zumtobel LUXMATE CIRIA Instructions For Start-Up And Use

Manual orientation

We are pleased that you have chosen this Zumtobel product. So that you can get the most from this
manual, the following information will be set out in this section:
• Target groups
• Manual structure
• Characters and symbols in this manual
• Other helpful information
Target groups
This manual is directed at specific target groups. The target groups that will find this manual most
useful are:
• Users
• Service personnel
Manual structure
Safety instructions
Introduction
LM-CIRIA control unit
Operation
Configuring the LM-CIRIA control unit
Commissioning the field level
Appendix
Characters and symbols in this manual
The following characters and symbols are used in this manual:
Individual steps in the instructions are numbered.
= After a step has been described, a description of the expected results will follow. Results are indi-
cated by = at the beginning of the line.
– Requirements which need to be checked before carrying out a step are indicated by –.
• Individual information to note is indicated by •. This information is also labelled with the word "Note".
Notes are given in grey boxes.
Other helpful information
Detailed information on the setup and function of your Zumtobel system can be found in our product
and system documentation and in the instructions supplied with the system.
If you should have any further questions, please contact your contract partner.
General information on our products can be found on our homepage
www.zumtobel.com.
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Section 1, page 8 Users, service personnel
Section 2, page 10 Users
Section 3, page 14 Users, service personnel
Section 4, page 17 Users, service personnel
Section 5, page 34 Service personnel
Section 6, page 82 Service personnel
Appendix, page 116 Users, service personnel
Manual orientation
4