Table of Contents
Advertisement
62 Assigning and configuring inputs
Path: SERVICE MENU / EXTERNAL / ASSIGN ADDRESS / INPUTS
Figure 146: INPUTS settings level
– Start point: INPUTS settings level
= The room address (ROOM) is displayed in the header.
= On/off key LED illuminates.
1.
Press the on/off key of the unaddressed input twice.
= The input's production number (P:) appears in the header.
2.
Run your finger along the touchring until the desired group address appears.
3.
Select TYPE to assign a building service type to the input.
= TYPE illuminates.
4.
Run your finger along the touchring until the desired setting appears.
5.
Select PRESENCE to assign a presence scene to the input.
= PRESENCE illuminates.
6.
Run your finger along the touchring until the desired number appears.
7.
Select
to assign an absence scene to the input.
= ABSENCE appears.
8.
Select ABSENCE to assign an absence scene to the input.
= ABSENCE illuminates.
9.
Run your finger along the touchring until the desired number appears.
10. Press the on/off key of the LM-CIRIA control unit to save the settings.
= The message SAVED briefly appears.
= Input is assigned and configured.
Note
• The inputs automatically take the room address of the LM-CIRIA control unit.
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Commissioning the field level
89
Advertisement
Chapters
Table of Contents
