563 Assigning the building service type
Path: SERVICE MENU / INTERNAL / CONFIGURATION / TYPE OF KEY
Figure 76: TYPE OF KEY settings level
– Start point: TYPE OF KEY settings level
1.
Select PRESENCE.
= PRESENCE illuminates.
2.
Run your finger along the touchring until the desired building service type appears.
3.
Select SAVE to save the setting.
= Building service type for presence scene is saved.
= The previous selection level appears.
4.
To assign a building service type to an absence scene, carry out steps 1–3, but select ABSENCE
instead.
Notes
• Settings are only saved if SAVE is selected.
• Selecting SAVE automatically saves all values displayed on the touchscreen.
Building service type
COMMON (all building services)
Brightness
Blind position
Slat angle
Screen
Colour temperature
Window
Curtain
Temperature
Air exchange
Table 10: Selection of TYPE OF KEY setting options
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Configuring the LM-CIRIA control unit
Building service type number
1
2
3
4
10
13
65
64
11
39
45