Fade Of Key Settings Level; Led Of Key Settings Level; Scene Of Key Settings Level; Touchring & Key Selection Level - Zumtobel LUXMATE CIRIA Instructions For Start-Up And Use

Appendix
A 111 TOUCHRING & KEY selection level
Via the TOUCHRING & KEY selection level, the basic settings of the touchring, on/off key and the on/
off key LED can be configured.
The TOUCHRING & KEY selection level contains the following settings levels:
• WAKE-UP REACTION
• LED OF KEY
• FADE OF KEY
• SCENE OF KEY
• TYPE OF KEY
Path: SERVICE MENU / INTERNAL / CONFIGURATION / TOUCHRING & KEY
Figure 189: TOUCHRING & KEY selection level Figure 190: TOUCHRING & KEY selection level

WAKE-UP REACTION settings level

Configure the behaviour of the touchring if touched when an absence scene is enabled here.

LED OF KEY settings level

Configure the behaviour of the on/off key LED here.

FADE OF KEY settings level

Configure the fade speed for presence and absence scenes here.

SCENE OF KEY settings level

Configure the presence and absence scenes for the on/off key here.
TYPE OF KEY settings level
Configure the building service type for the on/off key here.
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en 120