Zumtobel LUXMATE CIRIA Instructions For Start-Up And Use page 53

5912 Changing scene icons
Path: SERVICE MENU / INTERNAL / OPERATION
Figure 87: OPERATION selection level
– Start point: OPERATION selection level
1. Select EDIT.
= EDIT settings level appears.
= Option is illuminated.
Figure 88: EDIT settings level
2. Run your finger along the touchring until the desired icon appears.
3. Select NEXT.
= SYMBOL settings level appears.
4. To change the icon and adjust other settings, see Section
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Configuring the LM-CIRIA control unit
5.9.1.1 Adding scene icons.
53