Adjusting The Lighting Throughout The Room Using Scene Icons; Brightness Display - Zumtobel LUXMATE CIRIA Instructions For Start-Up And Use

42 Adjusting the lighting throughout the room using scene icons

– Start point: entry level
– Touchring has been assigned to the building service BRIGHTNESS (factory setting).
1. Select the desired scene icon, e.g. DESK.
= The scene icon illuminates.
= The scene is recalled.
Figure 19: Recalling DESK scene
2. Run your finger along the touchring.
Figure 20: Touchring
= BRIGHTNESS display appears.
Figure 21: BRIGHTNESS display
= Luminaires are brightened or dimmed.
= The upper right-hand corner of the scene icon is marked.
Notes
• Brighten: run your finger clockwise along the touchring.
• Dim: run your finger anti-clockwise along the touchring.
This is the factory setting; this setting is defined when the system is commissioned (TOUCHRING DIR
parameter).
• Stop lighting adjustment: pause finger or remove from touchring.
• The adjustment of the luminaires is temporary. If the same scene is recalled again, the luminaires
assume their set scene values once more.
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Operation
19