Positioning The Slats; Slats Display - Zumtobel LUXMATE CIRIA Instructions For Start-Up And Use

434 Positioning the slats

1. Select SLATS.
= Settings level appears.
Figure 32: SLATS settings level
2. Run your finger along the touchring.
Figure 33: Touchring
= SLATS display appears.
Figure 34: SLATS display
= Slats open or close.
Note
• Open: run your finger clockwise along the touchring.
• Close: run your finger anti-clockwise along the touchring.
This is the factory setting; this setting is defined when the system is commissioned (TOUCHRING DIR
parameter).
• Stop positioning adjustment: pause finger or remove from touchring.
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Operation
23