Zumtobel LUXMATE CIRIA Instructions For Start-Up And Use page 88

613 Re-grouping
Path: SERVICE MENU / EXTERNAL / RE-GROUP AND CHECK
Figure 145: RE-GROUP AND CHECK settings level
– Start point: RE-GROUP AND CHECK settings level
= BUS ADDR. illuminates.
1. Run your finger along the touchring until the desired bus address appears.
= Group address appears.
2. Select GROUP.
= GROUP illuminates.
3. Run your finger along the touchring until the desired group address appears.
4. Select SAVE.
= The message SAVED briefly appears.
= The new group address is saved for the output.
= The previous selection level appears.
Notes
• Settings are only saved if SAVE is selected.
• Selecting SAVE automatically saves all values displayed on the touchscreen.
• No new icons are created when re-grouping takes place.
• If a non-existent group address is selected, a new icon must be configured for the address
(manually or using SYMBOL BUILD-UP).
Parameter
GROUP
BUS ADDR.
Table 43: RE-GROUP AND CHECK setting options
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Value range
0,1,2,3,...99
Bus addresses available in
the room
Commissioning the field level
88