Table of Contents
Advertisement
5104 Touch reaction
Path: SERVICE MENU / INTERNAL / CONFIGURATION / TOUCH REACTION
Figure 139: TOUCH REACTION settings level
– Start point: TOUCH REACTION settings level
1.
Select DELAY.
= DELAY illuminates.
2.
Run your finger along the touchring until the desired setting appears.
3.
Select SENSITI.
= SENSITI. illuminates.
4.
Run your finger along the touchring until the desired setting appears.
5.
To check the delay time and sensitivity of the touchscreen, select TEST within 20 seconds.
= Countdown begins from 20 seconds to 0 seconds.
6.
Select SAVE within these 20 seconds to save the settings.
= Settings are saved.
= The previous selection level appears.
Notes
• Settings are only saved if SAVE is selected within 20 seconds.
• Selecting SAVE automatically saves all values displayed on the touchscreen.
Parameter
DELAY
Table 35: DELAY setting options
Parameter
SENSITI.
Table 36: SENSITI. setting options
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Configuring the LM-CIRIA control unit
Value range
(in milliseconds)
00, 10, 20, 30, .... 500
Value range
1, 2, 3
(1 = low sensitivity,
3 = high sensitivity)
Factory setting
00 MS
Factory setting
2
80
Advertisement
Chapters
Table of Contents
