Table of Contents
Advertisement
55 Configuring the touchring
The behaviour of the touchring can be adapted to suit individual requirements. You can configure how
the touchring behaves when an absence scene is enabled and it is touched, which building service
type is controlled by the touchring and whether operation is audibly confirmed with an action click.
551 Configuring touchring behaviour when switched on
Path: SERVICE MENU / INTERNAL / CONFIGURATION / WAKE-UP REACTION
Figure 71: WAKE-UP REACTION settings level
– Start point: WAKE-UP REACTION settings level
1.
Select TOUCHRING.
= TOUCHRING illuminates.
2.
Run your finger along the touchring until the desired setting appears.
3.
Select SCENE.
= SCENE illuminates.
4.
Run your finger along the touchring until the desired number appears.
5.
Select KEY.
= KEY illuminates.
6. Run your finger along the touchring until the desired setting appears.
5.
Select SAVE to save the settings.
= Touchring behaviour when switched on is saved.
= The previous selection level appears.
Note
• Settings are only saved if SAVE is selected.
TOUCHRING parameter
NO REACTION
DIMMING
DIMMING & SCENE
Table 3: TOUCHRING setting options
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Configuring the LM-CIRIA control unit
The touchring does not function if an absence scene is enabled.
Lighting can be dimmed using the touchring if an absence
scene is enabled, but no scene can be recalled.
Lighting can be dimmed and a scene can be recalled using the
touchring if an absence scene is enabled. The SCENE param-
eter defines which scene can be recalled.
Description
40
Advertisement
Chapters
Table of Contents
