Configuring Intensity - Zumtobel LUXMATE CIRIA Instructions For Start-Up And Use

572 Configuring intensity

Path: SERVICE MENU / INTERNAL / CONFIGURATION / LED OF KEY
Figure 79: LED OF KEY settings level
– Start point: LED OF KEY settings level
1. Select LEVEL.
= LEVEL illuminates.
2. Run your finger along the touchring until the desired setting appears.
3. Select SAVE to save the setting.
= Intensity setting is saved.
= The previous selection level appears.
Notes
• Settings are only saved if SAVE is selected.
• Selecting SAVE automatically saves all values displayed on the touchscreen.
Parameter
LEVEL
Table 13: LEVEL setting options
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Configuring the LM-CIRIA control unit
Value range
1, 2, 3, 4
(1 = very dark,
4 = very bright)
Factory setting
3
48