5953 Changing, arranging or deleting icons
Group and building service icons can be changed, rearranged or deleted as desired. These options are
carried out manually and are described in Sections
5.9.3 Group icons (manual)
596 Group numbers
Path: SERVICE MENU / INTERNAL / CONFIGURATION / DISPLAY / NUMBERS OF GROUP
SYMBOLS
Figure 132: NUMBERS OF GROUP SYMBOLS settings level
– Start point: NUMBERS OF GROUP SYMBOLS settings level
= Option is illuminated.
1.
To display the group numbers in the selection level, run your finger along the touchring until YES
appears.
2.
To hide the group numbers in the selection level, run your finger along the touchring until NO
appears.
3.
Select SAVE to save the setting.
= Setting is saved.
= The previous selection level appears.
Note
• Settings are only saved if SAVE is selected.
Parameter
NUMBERS OF
GROUP SYMBOLS
Table 27: NUMBERS OF GROUP SYMBOLS setting options
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Configuring the LM-CIRIA control unit
5.9.2 Building service icons (manual)
Value range
YES, NO
and
Factory setting
YES
73