13 Cleaning
You have selected a Zumtobel product with a high-quality surface. To ensure that your product lasts,
observe the following instructions.
Figure 1: Cleaning
Note:
• Clean the product using a soft, damp cloth.
• Dry the product using a soft towel.
• Corrosive and abrasive cleaning agents may damage the surface.
• Do not use any cleaning agents which contain chlorine or acid, or which are abrasive or corrosive.
Instead use only mild cleaning agents and water.
• Complaints resulting from the improper use of cleaning agents will be disregarded.
14 Disposal
For disposal in accordance with the WEEE Directive:
• Return the device to Zumtobel.
• Dispose of electrical device in accordance with national regulations.
• Do not throw out the device with non-recyclable waste.
• Do not burn the device.
15 Declaration of CE conformity
Zumtobel confirms that the LM-CIRIA control unit complies with the
relevant EU Directives.
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
SCHREIBTISCH
BESPRECHUNG
BEAMER
Safety instructions
9