Assigning Building Service Types; Touchring Type Settings Level - Zumtobel LUXMATE CIRIA Instructions For Start-Up And Use

Parameter
SCENE
Table 4: SCENE setting options
Parameter
KEY
Table 5: KEY setting options

552 Assigning building service types

Path: SERVICE MENU / INTERNAL / CONFIGURATION / TOUCHRING TYPE
Figure 72: TOUCHRING TYPE settings level
– Start point: TOUCHRING TYPE settings level
1. Run your finger along the touchring until the desired building service type appears.
2. Select SAVE to save the setting.
= Building service type is assigned and saved.
= The previous selection level appears.
Notes
• Settings are only saved if SAVE is selected.
Building service type
COMMON (all building services)
Brightness
Blind position
Slat angle
Screen
Colour temperature
Window
Curtain
Temperature
Air exchange
Table 6: Selection of TOUCHRING TYPE setting options
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Configuring the LM-CIRIA control unit
Value range
0 – 20
Value range
PRESENCE SCENE,
LAST SCENE
Building service type number
1
2
3
4
10
13
65
64
11
39
Factory setting
1
Factory setting
PRESENCE SCENE
41