Introduction; Basic Functions; Lm-Ciria Control Unit Icons; Scene Icon When Scene Has Been Manually Changed - Zumtobel LUXMATE CIRIA Instructions For Start-Up And Use

2 Introduction

21 Basic functions

• Recall up to 21 scenes
• Configure up to 21 scenes
• Operate up to 10 building services
• Configure up to 10 building services
• Operate up to 15 groups
• Configure up to 15 groups
• Operate up to 15 outputs
• Configure up to 15 outputs
• Switch on/off and brighten/dim lighting manually
• Change the colour temperature of the lighting
• Move blinds manually
• Open and close windows manually
• Change room temperature
• Display room temperature
• Address outputs
• Assign inputs and control units
• Configure the LM-CIRIA control unit
• Configure fade speeds
• Configure time-linked automation (LM-ZSM time control device)
• Configure automated scene sequence (LM-ZSQ sequencer)
• Configure daylight-linked automation

22 LM-CIRIA control unit icons

Scene
Scenes are displayed as buttons using scene icons. Selecting a button recalls that scene.
Figure 2: Scene icons
Scene temporarily changed
Recalled scenes can be changed using the touchring. The upper right-hand corner of the correspond-
ing scene icon is marked to show the change of scene.
Figure 3: Scene icon when scene has been manually changed
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Introduction
10