Room Temperature Display; Time Display - Zumtobel LUXMATE CIRIA Instructions For Start-Up And Use

Notes
• Group control values (in %) will only be displayed if all building services within the group have the
same control value.
• Control values will only be displayed on the touchscreen if there are actuators available that support
this function.

Time display

The time is displayed in the upper left-hand corner of the touchscreen.
Figure 10: Time display
Notes
• The time will only be displayed if the system has an internal clock.
• The time display can be enabled or disabled (factory setting: enabled).

Room temperature display

The room temperature is displayed in the upper right-hand corner of the touchscreen.
Figure 11: Room temperature display
Notes
• The room temperature will only be displayed if there are actuators available that support this func-
tion.
• The room temperature display can be enabled or disabled (factory setting: disabled).
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Introduction
12