Delay Time Max Settings Level; Delay Time Min Settings Level - Zumtobel LUXMATE CIRIA Instructions For Start-Up And Use

4. Run your finger along the touchring until the desired setting appears.
5. Select SAVE to save the settings.
= The message SAVED briefly appears.
= Day and loop settings are saved.
= DELAY TIME MIN settings level appears.
Notes
• Settings are only saved if SAVE is selected.
• Selecting SAVE automatically saves all values displayed on the touchscreen.
• To switch to the START SCENE settings level directly (without saving), select NEXT STEP.
Parameter
WHEN
Table 61: WHEN setting options
LOOPS parameter
--
00
01 – 99
Table 62: LOOPS setting options
Assigning a minimum delay time for scene changes
Figure 164: DELAY TIME MIN settings level
– Start point: DELAY TIME MIN settings level
1. Select MINUTES.
= MINUTES illuminates.
2. Run your finger along the touchring until the desired number appears.
3. Select SECONDS.
= SECONDS illuminates.
4. Run your finger along the touchring until the desired number appears.
5. Select SAVE to save the settings.
= The message SAVED briefly appears.
= Minimum delay time is saved.
= DELAY TIME MAX settings level appears.
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Value range
ALWAYS, MO, TU, WE, TH,
FR, SA, MO-FR, SA-SU
Infinite number of loops
No loop; only start scene is recalled.
Number of loops
Commissioning the field level
Factory setting
ALWAYS
Description
105