Stop Process Settings Level; Start Time Setting Options; Stop Time Setting Options - Zumtobel LUXMATE CIRIA Instructions For Start-Up And Use

Notes
• Settings are only saved if SAVE is selected.
• Selecting SAVE automatically saves all values displayed on the touchscreen.
• To switch to the START SCENE settings level directly (without saving), select NEXT STEP.
Parameter
HOUR
MINUTE
Table 58: START TIME setting options
Setting the stop time
Figure 161: STOP TIME settings level
– Start point: STOP TIME settings level
9. Select HOUR.
= HOUR illuminates.
10. Run your finger along the touchring until the desired number appears.
11. Select MINUTE.
= MINUTE illuminates.
12. Run your finger along the touchring until the desired number appears.
13. Select SAVE to save the settings.
= The message SAVED briefly appears.
= Scene sequence stop time is saved.
= STOP PROCESS settings level appears.
Notes
• Settings are only saved if SAVE is selected.
• Selecting SAVE automatically saves all values displayed on the touchscreen.
• To switch to the START SCENE settings level directly (without saving), select NEXT STEP.
Parameter
HOUR
MINUTE
Table 59: STOP TIME setting options
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en
Commissioning the field level
Value range
0 – 23
0 – 59
Value range
0 – 23
0 – 59
103