Set Snmp Commands; Enabling The Snmp Option - Symmetricom TimeProvider 5000 User Manual

Chapter 4 Provisioning
Provisioning for SNMP
The elements are defined in the activeAlarmTable and activeEventTable objects.
The object activeAlarmTable, 1.3.6.1.4.1.9070.1.2.4.6.2.2.1, is a table containing
the active alarms and can be used to poll the active alarms. The object
activeEventTable, 1.3.6.1.4.1.9070.1.2.4.6.2.2.2, is a table containing the active
events and can be used to poll the active events
The Alarm/Event ID element should be used to determine which alarm or event was
generated. Alarm and Event IDs are listed in

Enabling the SNMP Option

SNMP is an optional feature on the TP5000. It must be enabled. To enable this
feature, use the "set option" command with the key printed on the
Symmetricom-issued certificate for the unit.
Example
To enable the SNMP option, with an option key of "ABCDEF":
1. Type
set option snmp ABCDEF
Figure 4-34. Set SNMP Commands
310 TimeProvider 5000 User's Guide
Appendix A, System
then press Enter.
098-00028-003 Revision A – June, 2011
Messages.