Cli Overview; General Conventions; Timecreator 1000 Cli Command Set - Symmetricom TimeCreator 1000 User Manual

Appendix B Command Descriptions and Communications Interface

CLI Overview

CLI Overview
The Command Line Interface (CLI), also called the ASCII command set, can be
used to control the TimeCreator 1000 from a terminal connected to the EIA-232
serial port, or the Ethernet port. See
command set.
Figure B-1.

TimeCreator 1000 CLI Command Set

General Conventions

The following are CLI command general conventions:
Commands are not case sensitive

Braces { } indicate multiple options. When entering options in the CLI command,

enter one option from the options listed in the braces. Options within braces { }
are separated by a pipe ( | ).
Brackets [ ] indicate that the enclosed information is optional.

176 TimeCreator 1000 User's Guide
Figure B-1 below for an overview of the
097-93100-01 Revision C – February, 2010