Table of Contents
Advertisement
Performing Initial Configuration (CLI)
To change the root password, see
■
Storage Appliance Administration Guide, Release OS8.8.x
Performing Initial Configuration (CLI)
Use this procedure, which is a step-by-step utility, to complete initial configuration of network
interfaces, the Domain Name Service (DNS), time settings, name services, directory services,
storage, and remote support on the appliance using the command line interface (CLI).
Note -
initial configuration, as described in
Each step begins by printing its help, which can be reprinted by typing help. Use the done
command to complete each step. In the examples, the existing settings (obtained from the
DHCP server) are checked and accepted by typing done. To customize them, enter each context
(datalinks, devices and interfaces) and type help to see available actions for that context.
Ensure you have configured the system as described in
Before You Begin
■
System" on page
This procedure assumes you have just completed configuration of the network interface and
■
are using the same administrative client to access the CLI.
Log in using the administrative password that you created during system
1.
configuration.
hostname console login: root
Password:
To setup your system, you will be taken through a series of steps; as the setup
process advances to each step, the help message for that step will be
displayed.
Press any key to begin initial configuration ...
2.
Configure the appliance network interfaces.
For detailed information, see
Administration Guide, Release
Note -
"Configuring Management Interfaces" in Oracle ZFS Storage Appliance Administration Guide,
Release
aksh: starting configuration with "net" ...
256
Oracle ZFS Storage Appliance Installation Guide, Release OS8.8.x • August 2021
If installing clustered controllers, it is strongly recommended that you use the BUI for
238.
"Network Configuration" in Oracle ZFS Storage Appliance
You can create a management interface now, or at another time using a task in
OS8.8.x.
"Changing a User Password (BUI)" in Oracle ZFS
"Performing Initial Configuration (BUI)" on page
OS8.8.x.
"Configuring the
241.
Advertisement
Table of Contents
