Table of Contents
Advertisement
If you did not configure the management interface yet, see the tasks in
■
Management Interfaces" in Oracle ZFS Storage Appliance Administration Guide, Release
OS8.6.0.
Related Topics
For an overview of network interface configuration, see
■
Configuration" in Oracle ZFS Storage Appliance Administration Guide, Release
For further configuration, see
■
Appliance Administration Guide, Release OS8.6.0
For more information about cluster configuration, see
■
Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.0
To change the root password, see
■
Storage Appliance Administration Guide, Release OS8.6.0
Performing Initial Configuration (CLI)
Use this procedure, which is a step-by-step utility, to complete initial configuration of network
interfaces, the Domain Name Service (DNS), time settings, name services, directory services,
storage, and remote support on the appliance using the command line interface (CLI).
Note -
initial configuration, as described in
Each step begins by printing its help, which can be reprinted by typing help. Use the done
command to complete each step. In the examples, the existing settings (obtained from the
DHCP server) are checked and accepted by typing done. To customize them, enter each context
(datalinks, devices and interfaces) and type help to see available actions for that context.
Ensure you have configured the system as described in
Before You Begin
■
System" on page
This procedure assumes you have just completed configuration of the network interface and
■
are using the same administrative client to access the CLI.
1.
Log in using the administrative password that you created during system
configuration.
hostname console login: root
Password:
To setup your system, you will be taken through a series of steps; as the setup
process advances to each step, the help message for that step will be
displayed.
If installing clustered controllers, it is strongly recommended that you use the BUI for
128.
"Configuring the Appliance" in Oracle ZFS Storage
"Appliance Cluster Configuration" in
"Changing a User Password (BUI)" in Oracle ZFS
"Performing Initial Configuration (BUI)" on page
Configuring the Appliance for the First Time
Performing Initial Configuration (CLI)
"Configuring
"Working with Network
"Configuring the
OS8.6.0.
131.
145
Advertisement
Table of Contents
