Slb-L2 Error Is Seen When Reassigning A Port From One Lbg Group To Another (7100720); Slb Must Not Allow Different Vlans In The Same Group (7095155); Slb L2 Cannot Create More Than Two Groups, Slb L2 Limits To Two Lbgs (7092380) - Oracle Sun Blade 6000 Product Notes

Known Issues
"Some of the IGMP Conformance Results Don't Match Expectations (7006297 and
■
6997415)" on page 37
"Ports Lock and Corresponding LEDs Stay Lit or NEM Fails to Power On After Doing
■
Consecutive Hardware Resets (6992127)" on page 37
■ "QoS - set algo-type tailDrop queue-drop-algo Does Not Work
(6991230)" on page 38
"Packets Might Be Dropped When Using Q-in-Q Interop in Certain Configurations
■
(6989048)" on page 38
"The no default-metric [,short(1-16)>] Command Does Not Work as Documented
■
(6987482)" on page 38
"CMM Reports SAS2 on the NEM as Faulty if SAS2 Is Not Enabled
■
(6977266)" on page 38
"Using vlan 1 as Shown in Various Examples in the Documentation Generates Error Codes
■
(6968484)" on page 39
"When Multiple Configuration Scripts Are Run in Parallel, SEFOS Application Can Crash
■
(6936742)" on page 39
"Unlit Link and Activity LEDs for the SFP+ Ports (6873825)" on page 39
■
"The switch Command Line Option Is Unsupported" on page 39
■
"SSL V3.0 POODLE DISABLE SSL V3 (19842641)" on page 39
■
SLB-L2 Error is Seen When Reassigning a Port
From One LBG Group to Another (7100720)
When a node member is reassigned from one SLB-L2 LBG to another SLB-L2 LBG, you must
first remove the original LBGs and reestablish the two new groups.
SLB Must Not Allow Different VLANs in the Same
Group (7095155)
SLB does not support multiple VLANs in the same SLB group. Such a configuration has
unexpected results for fail-over. Currently, there is no prevention mechanism in place for setting
up such a configuration.
SLB L2 Cannot Create More Than Two Groups,
SLB L2 Limits to Two LBGs (7092380)
There is no workaround for this issue.
36 Sun Blade 6000 Ethernet Switched NEM 24p 10GbE Release 1.2.2 Product Notes • March 2016