Install The Rear Chassis Subassembly - Oracle SPARC T5-4 Service Manual

Install the Rear Chassis Subassembly

Slide the rear chassis subassembly into the server.
1.
2. Using a Phillips screwdriver, tighten the four green screws to secure the rear
chassis subassembly in the server.
Tighten the screws in the following order:
a. Lower right screw.
Upper left screw.
b.
c. Upper right screw.
d. Lower left screw.
3. Remove the connector covers from the replacement rear chassis subassembly.
4. Install the following components back into the rear of the server:
All five fan modules – see
■
"Install a Fan Module" on page
Servicing the Rear Chassis Subassembly
Install the Rear Chassis Subassembly
149.
187