Table of Contents
Advertisement
RDS (Remote Diagnostk
System)
Troubleshooting
RDS (Remote Diagnostic System)
Overview
If your machine
has a problem,
a service
technician
can perform various
diagnostic
tasks over the telephone
line from the service station to try to find
out what is wrong with your machine. The service technician can also use RDS
to change some of your machine's settings if you request it.
For RDS to work, you must switch it on before the service technician
starts the
RDS operation on your machine.
For some RDS operations,
it may be necessary
for you to stay near the
machine.
Switching RDS On/Off
Before your machine
can accept incoming
calls from an RDS, you have to
switch RDS on using Function
62. If it is switched
off, the machine will not
accept treatment from an RDS.
D
Q
H
n 1
H
Press Function, 6, and enter the
access number on page 121.
Then press 6,2. And press Yes.
SELECT
L:f NE
Scroll through the list of features
with 4 and ) until the screen is as
shown opposite.
Press Yes.
Change the on/off setting by
pressing 4 or ).
Finish: Yes and Function
Note: RDS is automatically
switched off 24 hours after you switch it on.
109
Advertisement
Table of Contents
Troubleshooting
