Table of Contents
Advertisement
RDS
(Remote Diagnostic System)
Overview
If your machine has a problem, a service technician can perform various
diagnostic tasks over the telephone line from the service station to try to find out
what is wrong with your machine. The service technician can also use RDS to
change some of your machine's settings if you request it.
For RDS operations, it may be necessary to stay near the machine.
RDS is automatically switched off 24 hours after it has been switched on.
Switching RDS On/ Off
Use this function when the service technician has changed the factory setting. If
you wish to switch RDS back on, you must switch it on yourself using the
following procedure.
1. Press the Function key and
6,2,2,2,2,6,2 using the ten keypad. Then
press the Yes key.
2. Press the
key until "
j
is displayed.
3. Press the Yes key.
4. Use the
and the
j
feature on or off.
5. Press the Yes key to store your setting,
then press the Function key.
keys to switch this
k
"
k
k
OTHER
k
k
j k
j k
83
Advertisement
Table of Contents
