Show Critmon Trace All - Cisco XR 12000 Reference

Watchdog Commands

show critmon trace all

To display information about all traces for a critical monitor, use the show critmon trace all command in
EXEC mode and in administration EXEC mode.
show critmon trace all [file filename original] [hexdump] [last entries] [reverse] [stats] [tailf] [unique]
[verbose] [wrapping] [location {node-id| all}]
Syntax Description
file
filename
original
hexdump
last
entries
reverse
stats
tailf
unique
verbose
wrapping
location
node-id
all
Command Default
No default behavior or values
Command Modes
EXEC
Administration EXEC
OL-30353-01
(Optional) Displays a specific file.
Name of a specific file.
Specifies the original location of the file.
(Optional) Displays traces in hexadecimal format.
(Optional) Displays trace information for a specific number of entries
Number of entries. Replace entries with the number of entries you want to
display. For example, if you enter 5, the display shows the last 5 entries in
the trace data. The range is from 1 to 4294967295.
(Optional) Displays the latest traces first.
(Optional) Displays the statistics in the command output.
(Optional) Displays the new traces as they are added in the command output.
(Optional) Displays the unique entries with counts in the command output.
(Optional) Displays the information for internal debugging in the command
output.
(Optional) Displays the wrapping entries in the command output.
(Optional) Specifies a node.
Node ID. The node-id argument is entered in the rack/slot/module notation.
Specifies all locations.
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
show critmon trace all
393