Leds - ABB REC650 ANSI Technical Manual

Relion 650 series bay control

Hide thumbs Also See for REC650 ANSI:

Table of Contents

1MRK 511 287-UUS A

Technical manual

GUID-D20BB1F1-FDF7-49AD-9980-F91A38B2107D V1 EN

Alarm LED panel

The function button and alarm LED panels are not visible at the same time. Each panel is

shown by pressing one of the function buttons or the Multipage button. Pressing the ESC

button clears the panel from the display. Both the panels have dynamic width that depends

on the label string length that the panel contains.

LEDs

The LHMI includes three protection status LEDs above the display: Normal, Pickup and

There are 15 programmable alarm LEDs on the front of the LHMI. Each LED can indicate

three states with the colors: green, yellow and red. The alarm texts related to each three-

color LED are divided into three pages.

There are 3 separate pages of LEDs available. The 15 physical three-color LEDs in one

LED group can indicate 45 different signals. Altogether, 135 signals can be indicated

since there are three LED groups. The LEDs can be configured with PCM600 and the

operation mode can be selected with the LHMI or PCM600.

There are two additional LEDs which are embedded into the control buttons

They represent the status of the circuit breaker.

The LHMI keypad contains push-buttons which are used to navigate in different views or

menus. With the push-buttons you can give open or close commands to one primary

object, for example, a circuit breaker, disconnector or a grounding switch. The push-

Local Human-Machine-Interface LHMI

Table of Contents