Signals; Settings; Function Block - ABB REC650 ANSI Technical Manual

1MRK 511 287-UUS A
9.3.3
9.3.4
9.3.5
Table 163: TCSSCBR Non group settings (basic)
Name Values (Range)
Operation Disabled
Enabled
tDelay 0.020 - 300.000
9.3.6
Technical manual

Function block

GUID-6F85BD70-4D18-4A00-A410-313233025F3A V2 EN
Figure 94: Function block

Signals

Table 161: TCSSCBR Input signals
Name Type
TCS_STATE BOOLEAN
BLOCK BOOLEAN
Table 162: TCSSCBR Output signals
Name Type
ALARM BOOLEAN

Settings

Unit Step
- -
s 0.001
Operation principle
The function can be enabled and disabled with the Operation setting. The corresponding
parameter values are Enable and Disable.
The operation of trip circuit supervision can be described by using a module diagram. All
the modules in the diagram are explained in the next sections.
Secondary system supervision
Default Description
0 Trip circuit fail indication from I/O-card
0 Block of function
Description
Trip circuit fault indication
Default Description
Enabled Operation Disabled/Enabled
3.000 Operate time delay
Section 9
219