ABB REC650 ANSI Technical Manual page 395

1MRK 511 287-UUS A
11.3.2.6
Technical manual
Settings
The function does not have any parameters available in Local HMI or Protection and
Control IED Manager (PCM600).
Settable timer function block TIMERSETQT
Identification
Function description
Settable timer function block
Functionality
The Settable timer function block (TIMERSETQT) has pick-up and drop-out delayed
outputs related to the input signal. The timer has a settable time delay (t).
When the output changes value the timestamp of the output signal is updated. The
supported "quality" state bits are propagated from the input each execution to the output.
A change of these bits will not lead to an updated timestamp on the output.
Input
tdelay
On
Off
IEC08000289 V1 EN
Figure 182: TIMERSETQT function
Function block
TIMERSETQT
INPUT
OFF
IEC09000303-1-en.vsd
IEC09000303 V1 EN
Figure 183: TIMERSETQT function block
IEC 61850
identification
TIMERSETQT
tdelay
en08000289-2-en.vsd
ON
Section 11
IEC 60617 ANSI/IEEE C37.2
identification device number
- -
t
Logic
389