ABB REC650 ANSI Technical Manual page 385

1MRK 511 287-UUS A
11.3.1.7
Technical manual
Settings
The function does not have any parameters available in Local HMI or Protection and
Control IED Manager (PCM600).
Loop delay function block LOOPDELAY
Function description
Logic loop delay function block
The Logic loop delay function block (LOOPDELAY) function is used to delay the output
signal one execution cycle.
Function block
LOOPDELAY
INPUT OUT
IEC09000296-1-en.vsd
IEC09000296 V1 EN
Figure 172: LOOPDELAY function block
Signals
Table 276: LOOPDELAY Input signals
Name Type
INPUT BOOLEAN
Table 277: LOOPDELAY Output signals
Name Type
OUT BOOLEAN
Settings
The function does not have any parameters available in Local HMI or Protection and
Control IED Manager (PCM600).
IEC 61850 IEC 60617
identification identification
LOOPDELAY
Default Description
0 Input signal
Description
Output signal, signal is delayed one execution cycle
Section 11
Logic
ANSI/IEEE C37.2
device number
- -
379