ABB REC650 ANSI Technical Manual page 389

1MRK 511 287-UUS A
Table 286: SRMEMORY Group settings (basic)
Name Values (Range)
Memory Off
On
11.3.1.11
Technical manual
Function block
SRMEMORY
SET OUT
RESET NOUT
IEC09000293-1-en.vsd
IEC09000293 V1 EN
Figure 176: SRMEMORY function block
Signals
Table 284: SRMEMORY Input signals
Name Type
SET BOOLEAN
RESET BOOLEAN
Table 285: SRMEMORY Output signals
Name Type
OUT BOOLEAN
NOUT BOOLEAN
Settings
Unit Step
- -
Reset-set with memory function block RSMEMORY
Identification
Function description
Reset-set with memory function block
Functionality
The Reset-set with memory function block (RSMEMORY) is a flip-flop with memory
that can reset or set an output from two inputs respectively. Each RSMEMORY function
block has two outputs, where one is inverted. The memory setting controls if the flip-flop
Default Description
0 Input signal to set
0 Input signal to reset
Description
Output signal
Inverted output signal
Default Description
On Operating mode of the memory function
IEC 61850 IEC 60617
identification identification
RSMEMORY
Section 11
Logic
ANSI/IEEE C37.2
device number
- -
383