Configuring System Functionality; Configuring An Analogue Extension Port - Splicecom S8000/718 Installation & Maintenance Manual

Installation and Maintenance Manual

Configuring system functionality

Configuring an Analogue Extension Port

Physical analogue extension ports on a Phone module or Call Server can be configured as follows:
1 In Manager select Phones
2 Select the relevant Phone Module or Call Server
3 Select the port you wish to configure
The port is automatically assigned a name which cannot be changed. This name is used by a User's Initial
Phone field to indicate the port to which they are assigned. The User field displays the name of the User
assigned to this port. Click on the name within the User field to view this User. Use the Cancel button to
return to the port.
You may wish to enter a description to assist with identifying the port eg its physical location etc.
For a list of which ports have been assigned to which Users, within Manager Assist, select System Utilities
and then Sorted. This feature will also highlight a record where a port has been assigned to more than
one User in error.
The following options can also be configured.
Configuring system functionality
Installation and Maintenance Manual v4/0615/10 89