Splicecom S8000/718 Installation & Maintenance Manual page 138

Installation and Maintenance Manual
Forcing Outgoing CLI
The Translate CLI To field in a Dial Plan entry can be used to specify the outgoing CLI for a specific call.
This is useful if you wish, for example, the main company number to be presented with external calls
rather than the User's individual DDI number.
A User or Department's Extension Number should be
entered in the Translate CLI To field similar to this
example.
This number will be used as the CLI for all internal calls.
For external calls the User or Department's DDI number
as specified in the relevant DDI Call Plan will be
presented as the CLI. (Please refer to Working with DDI
Plans section from page 195 for further information.)
If the Users' own extension numbers are to be used as
CLI for internal calls this example Dial Plan entry for each
extension number range can be created.
An entry in the Translate CLI To field will take precedence over a User's DDI Call Plan entry (please refer to
page 188 for further information) and the Trunk's Presentation Number (please refer to page 182 for
further information).
Example Dial Plan Entries
The following diagrams give examples Dial Plan entries that can be created to make use of features
available on the system. Further examples are available within the relevant sections of this manual.
A speed dial
134
An external number, extension number, User Name or
Department Name can be entered in the Translate To field.
Configuring system functionality
Installation and Maintenance Manual v4/0615/10