Installation and Maintenance Manual
The licences installed will be displayed in the Licences List, similar to the following diagram:
If a licence has not been entered correctly and not authenticated the Invalid message will be displayed
with the licence.
An error message will also appear in the Warnings screen within Manager which can be accessed as
follows:
1
Open Manager Assist and select System Utilities
2
Under the Diagnostics list select Warnings
3
Any error messages relating to licences will appear in this screen. No error messages indicate that
the licences have been accepted and authenticated correctly.
Please note that as you add a licence and the licence details, warning messages will be generated as the
licence is invalid until all the details have been entered, similar to the following diagram. These warnings
can be ignored. However if the completed licence details are rejected, as shown in the diagram above,
then the licence has not be accepted.
System Configuration
Installation and Maintenance Manual v4/0615/10
25
Need help?
Do you have a question about the S8000/718 and is the answer not in the manual?