Splicecom S8000/718 Installation & Maintenance Manual page 296

Installation and Maintenance Manual
5 Reboot the PCS 58x at a convenient time and the phone will be upgraded.
Upgrading the Software on the PCS 57x, PCS 56x, PCS 55x and PCS 542
The version of software being used by the handset can be viewed by:
PCS 57x/56x/55x - selecting the Favourites
PCS 542 – selecting the Settings
press Accept .
Before starting the upgrade, the software patch pcs5xx.tar.gz (570/560) or pcs5x1.tar.gz (572/562/55x) or
pcs54x.tar.gz (542) must be sent to the Call Server as described from page 286.
Upgrading locally
1 On the PCS 57x,56x, 55x or 542 lift the handset.
2 Press the Speaker button while rebooting the unit.
3 The boot menu will be displayed
Press:
3 CONFIG
6 CANCEL
9 BOTH
# S/WARE
4 Press hash (#) for S/WARE.
5 The unit will be upgraded and the reboot will complete
Please note that this method relies on the TFTP Server address of the phone being set to the Call Server
providing the upgrade software. Please refer to the Using Setnet section from page 299 on details how
to view and amend this entry.
Upgrading remotely via Telnet
You will need to know the IP address of the PCS 57x, PCS 56x, PCS 55x or PCS 542 which is displayed on
the handset within the Phone Information which can be accessed by:
PCS 57x/56x/55x - selecting the Favourites
PCS 542 – selecting the Settings
press Accept .
Alternatively, a list of the IP addresses for each PCS 57x, PCS 56x, 55x or 542 can be viewed in Manager
Assist by selecting System Utilities and then IP Addresses.
You will also need to know the phone's Password which is configured in Manager within the relevant IP
Phones' configuration form. By default this is set to 7388.
The PCS 57x or PCS 56x can be upgraded as follows:
1 Within the Command Prompt on a PC connected to the system enter
telnet <ip address of PCS 57x/56x/55x/542>
2 When prompted for the Login name enter diag
3 When prompted for the Password enter the password for this phone. By default this is 7388
Password is set within the relevant Phone's configuration form.)
292
button, then Settings
button, then the Down arrow
button, then Settings
button, then the Down arrow
and then Phone Information.
to highlight Phone Info and then
and then Phone Information.
to highlight Phone Info and then
eg telnet 192.168.0.248
Maintenance & Troubleshooting
Installation and Maintenance Manual v4/0615/10
.
(The