Installation and Maintenance Manual
10
Select the Telephony page
11
In the Login Access Code field enter a number (max 8 digits) that will be the User's passcode.
12
If required, in the Login Idle Time field, enter the number of seconds this User will be idle before
being automatic logged off. (By default this is set to 0 meaning that the User will not be
automatically logged off and will need to manually log off.)
13
Select Update or Apply when ready
The User's Login Access Code field can contain an asterisk (*). This means any number can be entered
during the log in process.
The User will now be able to log on to :-
1
An analogue handset via a Dial Plan entry, similar to the following examples:
The Translate to field contains the User's extension
number and Login Code.
or
In this example the User must enter
extension no*login code#
*3
or
(For further information on creating Dial Plan entries please refer to the Working with Dial Plans
section from page 130.)
2
An analogue handset to which no User is assigned – enter
#2040*1234#.
110
In this example the User's Login Access Code field
contains an asterisk (*), therefore the Translate To
field must specify the Login Code. The User must
extension no
enter *3
.
#extn no*login access code#
Installation and Maintenance Manual v4/0615/10
, eg
Configuring system functionality
Need help?
Do you have a question about the S8000/718 and is the answer not in the manual?