Splicecom S8000/718 Installation & Maintenance Manual page 356

Maximiser
Table of Contents

Advertisement

Installation and Maintenance Manual
IP Phone
Fields specific for an IP Phone listed under a Call Server:
Name
64 Domain Characters. The name of this phone.
Description
128 Characters. Text description for this phone.
Location
To provide Location Text Information for SNMP
Password
The code to be used when accessing this IP Phone via Telnet. By default the code is 7388 but this can be
changed via this field.
Product Version
The version of software running on this IP Phone.
Model
Unspecified – setting for PCS 100, 542, 55x, 56x, 57x and 58x
Mono 480 x 320
Colour 480 x 320
Colour 640 x 480 – setting for PCS 58x, 410/400
Serial Number
MAC address of this phone.
Partner Login Code
1-8 digit code. Used to secure ability to run a PCS 60 or PCS 50 as a partner on this port. If this port is
assigned to or will be log on to by a User configured as a Vision Call Centre Agent and/or will be using
the Vision Supervisor Console software, this entry must match the User's Remote Working Code. If this
port is assigned to a User configured to utilize the Vision Mobility application , this entry must match the
User's Remote Working Code.
Extension Anywhere
The number to be dialled by the system when the User assigned to this phone is working from home or
on a mobile and wishes to handle calls as though they were in the office.
Remote Idle
Seconds. The number of seconds that the User's home telephone will remain idle before a call from the
maximiser system is cleared.
Headset Working
Enable/Disable. If enabled the handset becomes inoperable and conversations are conducted via the
headset only.
Field Descriptions
352
Installation and Maintenance Manual v4/0615/10

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S8000/718 and is the answer not in the manual?

This manual is also suitable for:

4100510041405108

Table of Contents