Splicecom S8000/718 Installation & Maintenance Manual page 219

Installation and Maintenance Manual
7 From the Select Dial Plan list select the required Dial Plan. This will determine how digits dialled by
the voicemail server are handled. This is required when using Auto Attendant, Call Back, Ring back
when free and Assistant Telephone functionality.
8 In the H323 address field enter the domain name or IP address of the external PC that is providing
the voicemail service.
9 In the Capacity field enter the number of channels to be assigned to this port. This will be the
maximum number of simultaneous connections that will be allowed via this port. The relevant
number of VoicemaiPort licences must have been previously installed and be available.
10 If the external voicemail server is to support voicemail functionality tick Voicemail Server.
11 If the external voicemail server is to support Auto Attendant functionality tick Auto Attendant
Server. (Please refer to the Creating an Auto Attendant section from page 246 for further
information.)
12 If the external voicemail server is to support Music on Hold tick Music Server. (Please refer to the
Configuring Music Channels from page 203 for further information.)
13 If the external voicemail server is to support Department announcements tick Queue Message
Server. (Please refer to the Voicemail for a Department section from page 233 for further
information.)
14 If the external voicemail server is to support call recording tick Recording Server. (Please refer to
the Call Recording section from page 256 for further information.)
15 If the external voicemail server is to support the conferencing feature tick Conference Server.
(Please refer to the Conferencing section from page 172 for further information.)
16 Select Update or Apply when ready.
17 Configure any other facility required on this port – details of which are covered in the relevant
section of this manual.
Creating a BuiltIn Voicemail Port for each Call Server
Where a system consists of multiple Call Servers and different voicemail facilities are required on each
Call Server or Vision is running is on the system, a Voicemail Port called BuiltIn must be created for each
Call Server.
1 In Manager select Voicemail Ports
2 Select the Add button
3 In the Name field enter BuiltIn
4 Enter a Description if required.
5 Select Apply
6 Select the Call Server field.
7 From the Select Call Server list select the Call Server providing the voicemail service. This entry will
be displayed in the Call Server field.
8 Select the Dial Plan field.
9 From the Select Dial Plan list select the required Dial Plan. This will determine how digits dialled by
the voicemail server are handled. This is required when using Auto Attendant, Call Back, Ring back
when free and Assistant Telephone functionality.
10 In the Capacity field enter the number of channels to be assigned to this port. This will be the
maximum number of simultaneous connections that will be allowed via this port. The relevant
number of VoicemaiPort licences must have been previously installed and be available.
11 If the Call Server entered above is to support voicemail functionality tick Voicemail Server.
12 If the Call Server entered above is to support Auto Attendant functionality tick Auto Attendant
Server. (Please refer to the Creating an Auto Attendant section from page 246 for further
information.)
Working with Voicemail
Installation and Maintenance Manual v4/0615/10 215