Setup Menus; Setup Menus For Primary Measurements - Thermo Scientific Orion Versa Star VSTAR-PH Reference Manual

Chapter 3 Setup Menus

Setup Menus for Primary Measurements

1. Select the pH channel by pressing the channel key, then press f3 (Setup).
2. Scroll with the (>) key, highlight the appropriate pH module, press f3 (Select).
3. Arrow the cursor to Mode, press f3 (Select), arrow to pH, press f3 (Select).
4. Select the options.
5. Press the f1 (Back) button to step back to the main screen.
Thermo Scientific Orion V
pH Setup Menu
(Default values are in bold in the table below)
Electrode ID Input
Sample ID Off, Manual, Auto Increment
Resolution 0.1, 0.01, 0 .001
Stability Smart, Fast, Medium, Slow
Averaging Off, Automatic Smart
Read Type AutoRead, Timed, Single-Shot, Continuous
Buffer Group USA, DIN, Custom
Isopotential Value Off, On 7 .000
Linear Regression Off, On
Alarm** Limit, CalDue, Set Point
** Limit and set point alarm default set to 'off'.
Cal due alarm set to 12 hours.
ORP, RmV and mV Setup Menus
(Default values are in bold in the table below)
Electrode ID Input
Sample ID Off, Manual, Auto Increment
Resolution 1.0, 0 . 1
Stability Smart, Fast, Medium, Slow
Averaging Off, Automatic Smart
Read Type AutoRead, Timed, Single-Shot, Continuous
Alarm** Limit, CalDue*, Set Point
Note: Different modes (mV, RmV, ORP) in the pH module have setup
options relevant to that mode. *Only for ORP and RmV modes.
** Limit and set point alarm default set to 'off'.
Cal due alarm set to 12 hours.
s pH with LogR Temperature Module
ersa tar
5