Create Vlans - 3Com 4400 Configuring

Create VLANs

)
! 6
# 8
7
-
)
" 5 @ A
$ < @ A
/ < @" 1
0 < @4 A
2 < @ A
! < @
!! < @4 A
!# < @ A
! < @ 7 A
!
!" 5 > ?
Port 25 and port 26, in a 3Com 4400 are created when a stacking module is added or if you are using these notes for a 3Com 4200
series switch ports 25 and 26 are in the front panel of the switch. If you are using a stacking module, the Firmware version 4.1 you may
need to set the port speed for this port manually as the firmware may not detect the port speed automatically. This setting can be done
easily from the Web interface.
"
Throughout these notes, for the purpose of clarity, the main menu will be used as the starting point for configuration changes. The
lower level menus can create confusion but you can ignore the repeated instruction to press [Esc] if you understand your position in the
menu hierarchy.
Nov 2005
5 !
#"
&
& @3 4A
- &
*, -.
A *, -.
*, -.
0 A
*, -.
(
& *, -.
*, -. ! (
4 E
*, -. & @4
"
/
*
D *, -. + !
A
Compiled by Kaye Walter and Paul Warneke
! !# +
: *, -.
& #