Displaying And Maintaining Aaa Configuration - 3Com 5500-EI PWR Install Manual

Hide thumbs Also See for 5500-EI PWR:
Table of Contents

Advertisement

To do...
Enter system view
Create a HWTACACS scheme
and enter its view
Set the response timeout time
of TACACS servers
Set the time that the switch
must wait before it can restore
the status of the primary server
to active
Set the real-time accounting
interval
To control the interval at which users are charge in real time, you can set the real-time accounting
interval. After the setting, the switch periodically sends online users' accounting information to the
TACACS server at the set interval.
The real-time accounting interval must be a multiple of 3.
The setting of real-time accounting interval somewhat depends on the performance of the
TACACS client and server devices: A shorter interval requires higher device performance.

Displaying and Maintaining AAA Configuration

Displaying and Maintaining AAA Configuration
To do...
Display configuration
information about one specific
or all ISP domains
Display information about user
connections
Display information about local
users
Use the command...
system-view
hwtacacs scheme
hwtacacs-scheme-name
timer response-timeout
seconds
timer quiet minutes
timer realtime-accounting
minutes
Use the command...
display domain [ isp-name ]
display connection [ access-type { dot1x |
mac-authentication } | domain isp-name |
interface interface-type interface-number | ip
ip-address | mac mac-address | radius-scheme
radius-scheme-name | hwtacacs-scheme
hwtacacs-scheme-name | vlan vlan-id |
ucibindex ucib-index | user-name user-name ]
display local-user [ domain isp-name | idle-cut
{ disable | enable } | vlan vlan-id | service-type
{ ftp | lan-access | ssh | telnet | terminal } |
state { active | block } | user-name user-name ]
2-25
Remarks
Required
By default, no HWTACACS
scheme exists.
Optional
By default, the response
timeout time is five seconds.
Optional
By default, the switch must wait
five minutes before it can
restore the status of the primary
server to active.
Optional
By default, the real-time
accounting interval is 12
minutes.
Remarks
Available in
any view

Advertisement

Table of Contents
loading

This manual is also suitable for:

5500-ei series

Table of Contents